Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Electron pedals have been designed to offer a lightweight platform that isn’t going to break the bank.
COLOURS:
DETAIL GALLERY:
Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Electron pedals have been designed to offer a lightweight platform that isn’t going to break the bank.
Built using a Nylon Reinforced Composite, the Electrons use sealed cartridge bearings to help spread the stress load from heavy impacts and rubber lip seals between the axle end and pedal body to reduce the ingress of water and dirt – which will keep them going for longer in between services.
There are a total of 6 replaceable and adjustable steel pins per side to allow you to customise the level of grip to meet your own requirements. There are also two moulded pins on each side of the pedal for added grip.
Featuring the Nukeproof logo, there’s a choice of yellow, black or white and the Electron’s tip the scales at just 338g for the pair.
| 6 replaceable and adjustable steel pins per side |
| Nylon Reinforced Composite |
| Colour: Black or Yellow |
| Weight (per pair): 338g |
| BUILT FOR: | AM/XC/DH/FR |
| AXLE: | CRO MO |
| WEIGHT: | 338g |
| COLOUR: | Black, Yellow or White |
|
DIMENSIONS: |
98mm (w) x 95mm x 17mm |
In order to maximize the safe enjoyment of this product, you should read and carefully follow the following installation instructions and warnings. Failure to do so could result in unexpected wear and or failure, possibly resulting in injury. Please read the following directions and helpful hints when installing your new stem.
CLICK HERE to download the Nukeproof Pedal Instruction Sheet PDF
Pedal Installation Instructions:
All Nukeproof pedals are standard 9/16 x 20BSA threading. The pedals are marked “R” indicating the right pedal and “L” indicating the left pedal. The right pedal screws onto the crank arm in a clockwise direction and the left pedal screws on in a counter clockwise direction when using a 15mm pedal wrench or opposite when using an 8mm allen key.
Be sure to clean the crank arm threads and grease the threads on the pedal before mounting.
Pedal breakage can lead to the loss of control of the bicycle and result in serious personal injury or death.
Pedals must be maintained and inspected closely. In particular, after an impact or accident, even if there is no substantial visible damage. Have a dealer inspect the pedals prior to using again.
Replace your pedals periodically.
Consult with your dealer as to the appropriate frequency of replacement. Destroy any pedals you replace for safety reasons..
