Smooth-spinning, super grippy and rock-solid underfoot, the Nukeproof Neutron series of pedals have been extensively engineered to offer the optimum balance of light weight and reliable performance no matter what the conditions.
COLOURS:
DETAIL GALLERY:
Smooth-spinning, super grippy and rock-solid underfoot, the Nukeproof Neutron series of pedals have been extensively engineered to offer the optimum balance of light weight and reliable performance no matter what the conditions.
Custom CNC-machined for optimum strength and fatigue resistance with minimum weight penalty, each pedal body spins on high quality DU bushings with two sealed cartridge bearings per pedal to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services.
The low-profile parallelogram design offers maximum ground clearance and features a deep concave which allows the foot to “sit in” the pedal which improves grip and comfort. There are a total of 10 replaceable and adjustable pins per side to allow you to customize the level of grip to meet your own requirements.
Featuring fresh new laser-etched graphics and a choice of Black Anodized or Silver, Nukeproof Neutron pedals are available in three configurations:
Alu/CroMo: Forged 6061-T6 alloy pedal body and CroMo axle for strength and reliability at an excellent price (438g per pair);
Alu/Ti (new): Forged 6061-T6 alloy pedal body and titanium axle for lighter weight without compromising strength (374g per pair);
Mag/Ti: Our flagship model features a forged and CNC-machined magnesium body and titanium axle for the ultimate combination of light weight and strength (just 294g per pair).
| Low-profile parallelogram design |
| 10 replaceable and adjustable pins per side |
| CNC machined for improved strength-to-weight ratio |
| 2 x high quality DU bushings & 4 x sealed cartridge bearings |
| Laser-etched graphics |
| Colour: Black or Silver |
| Body options: Forged 6061-T6 alloy or custom CNC-machined magnesium |
| Axle options: CroMo or titanium |
| Weight (per pair): Alu/CroMo 438g, Alu/Ti 374g, Mag/Ti 294g |
| BUILT FOR: | AM/XC/DH/FR |
| AXLE: | CRO MO/TITANIUM |
| WEIGHT: | Alu/CroMo 438g |
| Alu/Ti 374g | |
| Mag/Ti 294g | |
| COLOUR: | Black or Silver |
| DIMENSIONS: | 98mm (w) x 99mm x 17mm |
| PEDAL SPARES AVAILABLE: | |
| Neutron Cro-mo Axle Kit |
Pair - LH & RH |
| Neutron Ti Axle Kit |
Pair - LH & RH |
| Pedal Bearing Kit |
Each |
| Pedal Bushing |
Each |
| Proton Cro-mo Axle Kit |
Pair - LH & RH |
| Proton Ti Axle Kit |
Pair - LH & RH |
| Rubber Cap |
Pair |
| Screw Pin Set |
Each |
In order to maximize the safe enjoyment of this product, you should read and carefully follow the following installation instructions and warnings. Failure to do so could result in unexpected wear and or failure, possibly resulting in injury. Please read the following directions and helpful hints when installing your new stem.
CLICK HERE to download the Nukeproof Pedal Instruction Sheet PDF
Pedal Installation Instructions:
All Nukeproof pedals are standard 9/16 x 20BSA threading. The pedals are marked “R” indicating the right pedal and “L” indicating the left pedal. The right pedal screws onto the crank arm in a clockwise direction and the left pedal screws on in a counter clockwise direction when using a 15mm pedal wrench or opposite when using an 8mm allen key.
Be sure to clean the crank arm threads and grease the threads on the pedal before mounting.
Pedal breakage can lead to the loss of control of the bicycle and result in serious personal injury or death.
Pedals must be maintained and inspected closely. In particular, after an impact or accident, even if there is no substantial visible damage. Have a dealer inspect the pedals prior to using again.
Replace your pedals periodically.
Consult with your dealer as to the appropriate frequency of replacement. Destroy any pedals you replace for safety reasons..
