Generator Rear 135mm x 12mm
The NEW GENERATOR Hub from NUKEPROOF. The 7075 Alloy main hub body has been cold forged for optimum strength and fatigue resistance with extensive CNC machining to shave off any unnecessary weight without compromising strength.
The Rear 135 x 12mm has been designed to fit frames with a 135mm hub spacing. Built to be strong enough for DH but still light enough for XC. This hub features a total of five sealed cartridge bearings with two on the drive side to help spread the loads of pedalling forces through the hub and one on the non-drive side with a further two in the freehub body. A low friction seal between the bearings and freehub body eliminates contamination of the bearings from ingress of water and dust.
These hubs feature 6 pawls with leaf springs which are located in the main hub body for ease of maintenance. These engage into a 30 tooth steel ratchet which is located in the Alloy freehub body for additional strength and increased leverage ratio which provides positive engagement and super fast pick up for increased acceleration.
Weighing in at a measly 300g these hubs weight belie their true pedigree. Who says strong has to be heavy!
Product Features:
- 7075 Alloy main hub body
- 7075 Alloy sub axle (QR)
- Alloy freehub body with 30T steel ratchet
- 6 Pawls with leaf springs
- 4 x Sealed 6902 & 1 x sealed 15268v bearings
- 32 Hole
- Width: 135mm
- International Standard 6 bolt disc brake interface
- 67mm flange diameter
- 34.5mm Non-drive side Centre-To-Flange diameter
- 19mm Drive side Centre-To-Flange diameter
- 15.3mm End of axle to disc mount face
- Weight: 300g
UK RRP: £119.99
Distributed Worldwide By