Components: 135 SC Rear Hubs



New for 2013 the Nukeproof Generator short cassette (SC) rear hub has been designed specifically for slopestyle, 4X, trials and dirt jumping disciplines where riders seldom need the full range of gears across a 9 or 10 speed cassette. With the short cassette design we have been able to increase the hub flange distance which results in building a stronger wheel whilst the shortened freehub body still provides adequate space to allow you to run the top 7 cogs on a 10 speed cassette or the top 6 cogs on a 9 speed cassette.

Featuring a 135mm x 12mm bolt-thru hub body with steel cassette carrier, the Generator SC is engineered from tough but lightweight 7075-series aluminium. Cold-forged construction delivers optimum strength and fatigue resistance while extensive CNC machining shaves excess weight without compromising structural integrity.

The hub features a total of four sealed cartridge bearings: one on the drive side, one on the non-drive side and a further two in the freehub body.

A low friction seal between the bearings and freehub body eliminates contamination of the bearings from ingress of water and dust.

Available in black, silver or Nukeproof yellow..

  • 7075 alloy main hub body
  • 7075 alloy sub axle
  • 3 x Sealed 6902 & 1 x sealed 15268 bearings
  • Steel cassette carrier with 30T steel ratchet
  • 6 pawls with leaf springs
  • 32-hole
  • International Standard 6-bolt disc brake interface
  • Width: 135mm
  • 67mm flange diameter
  • Spoke PCD 58mm, spoke hole diameter 2.3mm
  • Left side Axle edge-to-flange diameter: 35.5mm
  • Right side Axle edge-to-flange diameter: 37mm
  • End of axle to disc mount face: 15.3mm
  • New graphics for 2013
  • Designed to fit frames with 135mm x 12mm thru-axle hub spacing. Short Cassette body is designed for use with 7x10speed cassette cogs or 6x9speed cassette cogs
COLOUR: Black, silver or Nukeproof yellow
SPARES: Comprehensive list of spare parts available aftermarket